Camworks 5 axis2/14/2023 ![]() ![]() Notice how the toolpath conforms to the tapered pocket shape. An example of this toolpath is shown on the tapered pocket pictured above. Fine surface finishes can be achieved by reducing the axial stepdown amounts or Depth of Cut, at the expense of an increased cycle time. “Tapered” Checkbox enabled in CAMWorks, cut using a Flat End MillĪ common workflow for this method would be to rough with a Flat End Mill and finish with a Bull Nose (“Hog Nose”) End Mill. This allows you to machine tapered features without special tapered tools. The resulting toolpath is similar to a 3 axis Z-level toolpath, which is a very powerful feature considering it is provided in the 2.5 Axis module. The first method is to specify a taper angle in CAMWorks (or have CAMWorks automatically detect it), which will allow the toolpath to conform to the tapered shape of the feature. In CAMWorks there are two methods to machining tapered 2.5 axis features, and each comes with a different approach and advantages. ![]()
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |